Fully compliant with ATEX regulations
 Condition Monitoring |
 Flare Detection |
 Early Fire Detection |
Use the power of thermal imaging in hazardous locations.
REQUEST FOR QUOTATIONREQUEST FOR MORE INFORMATION
Explosive atmospheres need to be protected from ignition sources by selecting equipment and protective systems which meet the requirements of the ATEX Product Regulations or similar regulations.
FLIR A310 ex is an ATEX compliant solution, with a thermal imaging camera mounted in an enclosure, making it possible to monitor critical and other valuable assets also in explosive atmospheres. Process monitoring, quality control and fire detection in potentially explosive locations are typical applications for the A310 ex.
1. Heater
2. Sensors for temperature, air humidity, voltage & pressure
3. Power supply: 24V DC
4. 2 SFP ports for fiber optic, 100 Base-FX or copper ethernet
5. ATEX compliant housing
Fixed mounted thermal imaging cameras like FLIR A310 ex can be installed almost anywhere to monitor your critical equipment and other valuable assets. It will safeguard your plant and measure temperature differences to assess the criticality of the situation. This allows you to see problems before they become costly failures, preventing downtime and enhancing worker safety
Learn more about the FLIR A310, the thermal imaging camera inside FLIR A310 ex.
| General Data | |
| Ambient temperature range for operation | –20°C to +40°C (-4°F to 104°F) |
| Protection class | IP67 |
| Weight | 6.7 kg (without camera and lens) |
| Empty volume | 5.06 l |
| External dimensions (without sun shield) | D = 170 mm, L = 408 mm |
| Housing material / Surface | Nickel-plated aluminium / Powder coated |
| Protection window | Germanium, double-sided AR Coated, externally with additional hard-carbon layer |
| Maximum power of the additional heater | 16 W |
| Operating voltage | 24 V DC |
| Maximum electric connection power | 60 W |
| Power cable / Power cable configuration | Helukabel 37264 / Pigtail |
| Length of power cable | 4 m (13 ft.) |
| Integrated controller | 4-port switch with 2 × fiber-optic LC 100Base-FX or 2 × RJ45(10/100) up-links, ring-topology support for reduced cabling effort, 2 × internal temperature sensors, air humidity and pressure sensor, digital output module controllable via Modbus TCP/IP or web interface to enable turning the heater on/off |
| Ethernet medium | Multi-mode breakout fiber AT-V(ZN)Y(ZN)Y 4G50/125 OM2 |
| Length of Ethernet cable | 4 m (13 ft.) |
| Ethernet, configuration | Pigtail with FC-connector |
| Explosion protection-specific data | |
| For use in EX zone | 1, 2, 21, and 22 |
| Ignition protection category | Flame-proof enclosure “d” |
| Maximum surface temperature (according to temperature class T6) | Maximum 85°C |
| ATEX certification (version -AXC) | EX-Protection Gas: II 2G Ex d IIC T6 Gb, EX-Protection Dust: II 2D Ex tb IIC T85° Db |
| Verification certificate | ZELM 12 ATEX 0485 X |
| Imaging and optical data | |
| IR resolution | 320 × 240 pixels |
| Thermal sensitivity/NETD | < 0.05°C @ +30°C (+86°F) / 50 mK |
| Field of view (FOV) / Focal length | 25° × 18.8° with 18 mm (0.7 in.) lens or 45° × 33.8° with 9.66 mm (0.38 in.) lens |
| Minimum focus distance | 0.4 m (1.31 ft.) |
| Spatial resolution (IFOV) | 1.36 mrad with 25° lens or 2.59 mrad with 45° lens |
| Lens identification | Automatic |
| F-number | 1.3 |
| Image frequency | 30 Hz |
| Focus | Automatic or manual (built in motor) |
| Zoom | 1–8× continuous, digital, interpolating zooming on images |
| Detector data | |
| Detector type | Focal Plane Array (FPA), uncooled microbolometer |
| Spectral range | 7.5–13 μm |
| Detector pitch | 25 μm |
| Detector time constant | Typical 12 ms |
| Measurement | |
| Object temperature range | –20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F) |
| Accuracy | ±2°C (±3.6°F) or ±2% of reading |
| Measurement analysis | |
| Spotmeter | 10 |
| Area | 10 boxes with max./min./average/position |
| Isotherm | 1 with above/below/interval |
| Measurement option | Measurement Mask Filter Schedule response: File sending (ftp), email (SMTP) |
| Difference temperature | Delta temperature between measurement functions or reference temperature |
| Reference temperature | Manually set or captured from any measurement function |
| Atmospheric transmission correction | Automatic, based on inputs for distance, atmospheric temperature and relative humidity |
| Optics transmission correction | Automatic, based on signals from internal sensors |
| Emissivity correction | Variable from 0.01 to 1.0 |
| Reflected apparent temperature correction | Automatic, based on input of reflected temperature |
| External optics/windows correction | Automatic, based on input of optics/window transmission and temperature |
| Measurement corrections | Global and individual object parameters |
| Alarm | |
| Alarm functions | 6 automatic alarms on any selected measurement function, Digital In, Camera temperature, timer |
| Alarm output | Digital Out, log, store image, file sending (ftp), email (SMTP), notification |
| Set-up | |
| Color palettes | Color palettes (BW, BW inv, Iron, Rain) |
| Set-up commands | Date/time, Temperature°C/°F |
| Storage of images | |
| Storage media | Built-in memory for image storage |
| File formats | Standard JPEG, 16-bit measurement data included |
| Ethernet | |
| Ethernet | Control, result and image |
| Ethernet, type / standard | 100 Mbps / IEEE 802.3 |
| Ethernet, configuration | Pigtail with FC-connector (fiber) |
| Ethernet, communication | TCP/IP socket-based FLIR proprietary |
| Ethernet, video streaming | MPEG-4, ISO/IEC 14496-1 MPEG-4 ASP@L5 |
| Ethernet, image streaming | 16-bit 320 × 240 pixels @ 7-8 Hz – Radiometric |
| Ethernet, protocols | Ethernet/IP, Modbus TCP, TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP |
Inquire more about FLIR A310 ex.